|Product Name||One piece toilet|
|Type||Upper-pressing Two-end Type|
|Color||As picture or other|
|Delivery time||Within 20-30 days after received the payment|
UF,PP slowing down toielt cover
Water-saving,Competitive price,Ultimate configuration,Tube-glazing technology,
How to install the toilet? Will it be troublesome to install it yourself?
It’s actually very easy. The toilet is installed by yourself. Tools needed to install the toilet: silicone (neutral) + silicone gun, if possible, you can use a high-melting hot melt glue gun (hot melt glue is more resistant to mold than silica gel), a flange ring (available on the market, recommended high Molecular flange). A long screwdriver. Installation: Put the flange ring on the sewage pipe mouth and align it. The base of the toilet is filled with silica gel, and the drain is facing the flange, and the flange is aligned with the sewage pipe. Adjust the position, don’t pretend to be crooked. Sit down on the toilet, get up for about half an hour, sit on it and don’t wander around. In winter, you can open the Yuba, which is dry. Install the water tank accessories in the water tank according to the instructions, do not try to save trouble, leak the gasket, otherwise it is easy to leak water. Don’t cover the lid, or you will have to remove it in case you need to adjust it. Finally, screw the water tank to the toilet. When screwing the screws, the left and right screws should be screwed to the left and right. Pay attention to the balance and connect the water inlet hose. Adjust the position of the water tank accessories, close the lid and let the water leak, and see if there is any leakage between the water tank and the toilet. If there is water leakage, adjust the tightness of the connecting screw. It’s OK if it doesn’t leak, close the cover, add the button cover, and you’re done.