With the improvement of modern living standards, the toilet special angle valve has replaced the previous ordinary check valve! The main purpose of the toilet angle valve is to increase the water inlet and outlet of the toilet to control the inlet pressure and close the water inlet function, and the spray gun can facilitate the cleaning of the toilet!
The definition of toilet angle valve is introduced:
Angle valve is a kind of valve, mainly can play a role in isolating the medium. There is also the role of facilitating the maintenance of terminal equipment. The role of the angle valve is to control the water pressure when the water pressure is unstable. This can prevent the water pipe from bursting due to excessive water pressure. Angle valve is a necessary part in the family. It can bring a lot of convenience to our lives and reduce a lot of trouble.
Material used for toilet angle valve:
Commonly used materials for toilet angle valves are that the main part of the angle valve is made of pure copper, the inlet pipe is made of 304 stainless steel and contains an EO pipe. The spray gun and base are made of ABS engineering plastics. Generally, they are equipped with a separate stainless steel decorative cover!
Precautions for installation and use of toilet angle valve:
Pay special attention not to screw the main body with a wrench for installation, otherwise it will damage the main body. Please refer to Figure 1 for the installation method, and be careful not to enter the sundries!
Every time you use the spray gun, be sure to turn off the corresponding water inlet valve to avoid damage to the water pipe and spray gun due to the high pressure of the tap water at night, causing tap water leakage!
Toilet angle valve function:
1. Start to transfer the internal and external water outlets.
2. Because the water pressure is too large, it can be adjusted on the triangle valve, and turn it down.
3. It is the function of the switch. If there is a water leak in your home, you don’t need to turn off all the water valves at this time, just turn off the angle valve.
4. It is beautiful and generous. Therefore, it is an indispensable component when decorating a new house.
5. The inner wire hole on the wall can be connected with the inner wire hole of the hose
6. The water source can be cut off to facilitate the maintenance and repair of the toilet in the future
7.: The water pressure can be controlled by adjusting the water volume to protect the normal use of toilet sanitary ware.
