Nowadays, the opening of the smart era has brought countless smart products to our lives, such as the smart toilet in our lives. Many do not know how to use the smart toilet. After the smart toilet is cleaned for one minute, you can press “warm air.” “Dry” button, so that the effect of drying can be achieved, and the range of drying can also be adjusted, as long as you select the direction to move forward, backward, left, and right. Not only can it dry, but it can also heat the seat ring, especially in cold things, this function is very practical. Press “Sit temperature adjustment”, you can select the temperature ranging from 34 degrees Celsius to 42 degrees Celsius.
After entering the toilet, you can directly press the flush button, not only that, you can also set the automatic flushing function of the smart toilet. You can choose how long it takes to automatically flush after the human body is seated. Set the time, and then enter the number of seconds after the human body induction time. If the presence of the human body cannot be detected, the automatic flushing starts. In this way, the trouble of manual flushing is greatly eliminated.
Intelligent automatic toilet not only has the above functions, but also has some additional functions. You can also set the automatic deodorization function to start 3 seconds after sitting in the seat, and stop 30 seconds after the human body leaves the seat. You can also set up MP3 during the toilet, as long as you save a small amount of data in the MP3 player in advance, press the “MP3 power” symbol when the power is on. It can be automatically closed after leaving, and the next time you go to the toilet, use its automatic memory function to automatically open the last reserved operation.
There are many buttons on the operation panel of the smart toilet. They are power, drying, washing, stop, etc., and then each corresponds to an indicator light, which can correspond to energy saving, water heating, seat heating, and toilet. Flush and human body induction. When operating, just plug in the power and select the corresponding function.
The main function of the smart toilet is that after entering the toilet, press “clean”, and then the cleaning nozzle will spray water at a fixed position for about one minute and then stop. This operation can be used repeatedly. Its drying function is also more applicable. Just press the drying button, and the smart toilet will release warm air and start drying. If you need to stop, just press it again.