With the continuous development of society, the market is getting bigger and bigger. There are three types of smart toilets in the market. One is smart toilets with cleaning, heating, sterilization, etc., and the other is smart toilets that can automatically change their sleeves. Toilet, the other is a smart toilet with automatic sleeve change and cleaning function. So how to distinguish the quality of the toilet seat? The following is introduced by the editor:
One step: weight
When buying a toilet, you must first look at its weight. The general principle is that the heavier the better. An ordinary toilet weighs about 50 kg, and a good toilet weighs about 100 kg. A simple test method to see the weight of the toilet: pick up the water tank cover with both hands, you can weigh its weight. If it is very heavy and full of texture in the hand, it is good; on the contrary, if it is light and light, it will definitely not pass. This is one of the simplest test methods for toilets. The high weight means that the selected material has a higher density, and the higher the density, the water absorption is relatively low, and it is not easy to produce cracks and stains.
Step 2: Outlet
Generally speaking, it is best to have one drain hole at the bottom of the toilet. Nowadays, many brands have 2-3 drain holes (according to different hole distances), but the more drain holes, the more it affects the momentum. The water outlet of the toilet can be divided into bottom drainage and horizontal drainage. It is necessary to measure the distance from the center of the drain to the wall behind the water tank, and buy the same model of toilet to seat it, otherwise the toilet cannot be installed. The water outlet of the horizontal drainage toilet should be equal to the height of the horizontal drainage outlet, preferably slightly higher to ensure smooth sewage. The 30 cm toilet is the middle water toilet: the 20 to 25 cm is the rear toilet; the distance is 40 cm The above is the front flush toilet. There is a slight error in the model, and the launching is not smooth.
Step 3: Look at the glazed surface
When buying a toilet, you must pay attention to the glazed surface of the toilet. The glazed surface of a good-quality toilet should be smooth and free of particle defects, pure color, no variegated color, and saturated color. After inspecting the outer surface of the glaze, you should also touch the toilet drain. If it is rough, it will easily cause hanging in the future.
Step 4: Look at the caliber
The toilet is a large-diameter sewage pipe and the inner surface is glazed. It is not easy to get dirty, and the sewage is discharged quickly and effectively, which effectively prevents clogging. The test method is to put the whole hand into the toilet mouth. Generally, one palm has a large capacity.
Step 5: Look at the water tank
Leaks in the water storage tank of the toilet are generally not easy to detect except for the obvious sound of dripping water, which can be determined. The staff introduced us to a simple inspection method: drip blue ink into the toilet tank, stir it and see if there is any blue water flowing out of the toilet outlet, if there is a leak in the toilet. In addition, the water tank of the toilet is best to choose a higher height, so that the momentum is good.
Step 6: Look at the water parts
The quality of the water directly determines the service life of the toilet. The quality of the water fittings of branded toilets and ordinary toilets is very different, because almost every family has experienced the pain of no water from the water tank, so when choosing a toilet, do not ignore the water fittings. The identification method is to listen to the sound of the button. Crisp sound.
Step 7: Watch the flush
From a practical point of view, the toilet should first have the basic function of flushing thoroughly. Therefore, the flushing method is very important. The flushing of the toilet is straight flush, siphon flush (or diagonal flush), whirlpool siphon, and jet siphon. Pay attention to the choice of different drainage methods: the toilet can be divided into “straight flushing”, “siphon flushing (or diagonal flushing)” and “siphon vortex”.
Straight flushing and siphon flushing (or oblique flushing) water injection volume is about 6 liters, with strong sewage discharge capacity, but the sound is loud when flushing; while the whirlpool type uses a large amount of water at a time, but has a good mute effect. Consumers may wish to try a siphon flush (or oblique flush) toilet, which has the advantages of both straight flush and siphon, which can quickly flush dirt and save water.